Service and Maintenance
Draining water out of the MACH 2 hull
The MACH 2 has small drain holes in each bulkhead. These little holes allow water to flow through the boat so it can be emptied via the bung holes in each tank.
This image should make it easier for MACH 2 sailors to empty any water that may get into the boat.
Note: The red circles are the drain holes
Caring for your foils
We want to advise you that extremely high temperatures can have a detrimental affect on foils. If you sail in typically hot enviroments, or are planning on attending events in hot climates please be aware that your foils are highly technical pieces of equipment and accordingly care is need in looking after them.
MACH 2 foils are a pressurised and sealed unit. Adverse temperatures can damage this product.
Keep foil temperature under 50 C or 122 F degrees
Note: Typically foils can easily exceed this temperature by:-
- Leaving in a car
- Exposing to direct sunlight
- Leaving out in high ambient temperatures with no air movement"
Please contact sales@mach2boats.com if you require more information.
Care is needed keep your new MACH 2 in tip top condition. In order to maintain the performance of your boat MACH 2 Boats will provide:-
- First time assembly guidelines
- Care and maintenance guides
- Tuning Guides
- Transporatation guides
Warranty:
All MACH 2 boats come with a 2 year warranty which warrants that the boat and its associated parts will be free from defects in materials and workmanship for the Warranty Period under conditions of "reasonable use". MACH 2 Boats is not liable to the buyer for damage caused to the boat and its associated parts by:-
- wear and tear
- accident
- vandalism
- neglect
- improper set up
- modification
- non approved repair
- transportation damage
- storage damage
The warranty policy may be transferred with the boat upon the sale to a third party only with the consent of MACH 2 Boats.
